Maxi 310 2 Product Shelf Cooler With Recirc
This factory re-built (reconditioned) Maxi 310 2 product cooler- provides an almost equal longevity compared with new, fitted with all new mechanical parts and a lovely new cabinet whilst maintaining the legendary Maxi performance. Allowing for greater savings when compared with buying brand new.
The Maxi 310 2 product cooler is equipped with 2 x long 6-metre integral cooling coils, and a recirculating pump for trace cooling to tap.
Please Note: For mobile bars, Home bars, garden bars and Man cave/She hut bars etc - each cooling coil will reduce the incoming beverage temperature by up to 10 degrees Celsius. In order to reach desired serving temp calculate the keg temperature vs cooling coil length.
e.g. A keg stored in a cellar at 12 degrees centigrade using one cooling coil will serve at 2 degrees.
e.g If the kegs are not stored in a chilled cellar, a keg stored at 22 degrees using one cooling coil will serve at 12 degrees centigrade so if your dispensing a lager or cider you will then need to double up using two cooling coils to end up at 2 degrees Celsius.
If you're unsure please contact us with the product you're planing to dispense with its ideal serving temperature and we will be happy to assist in selecting the correct cooler or setup.
This factory re-built cooler is re-conditioned as follows:
|Product coils:||Serviced or new where necessary|
|Water bath and refrigerant lines:||Reconditioned|
|Agitator pump:||Reconditioned or New|
|Warranty:||1 year back to base|
|Recirculation type No-6 pump with 3/8" outlets. Pump lift:||5-Metres|
|3/8" Product cooling coils:||2 x Long 6-Metres 316 grade stainless steel. (Each coil will reduce incoming temperature up to 10 degrees Celsius)|
|Dimensions:||Width 590 x Depth 455 x Height 280mm (Please allow a minimum of 50mm extra space around the cooler for ventilation)|
|Electrical spec:||220-240Vac, Run-2.5Amps Startup-10Amps, 575Watts.|
|Thermostat:||Ice bank only|