Eco Tube Font Keg Beer/Cider Dispense Starter Kit
Eco Tube Font Home Bar Kit
The perfect starter pack Keg dispense kit
Great for home bar, garden bar, man cave bar, sheila bar, mobile bar etc just clamp the bar font onto a bar top, table etc with the equipment underneath
All you need to supply is the keg and gas
This quality beer/cider font dispense kit has all you need to dispense one beverage from a keg.
The beautiful high polished stainless steel Eco tube bar font, complete with illuminated round 82mm branding holder and equipped with a 6" drip ray and holster, is easy to install. Using a clamp on bar system, clamps onto surfaces up to 80mm thick. (No need to drill holes in bar top)
82mm round lens, branding can normally be obtained from your beer supplier.
This kit is designed for the equipment cooler, gas and keg etc, to be located directly below the bar tap, within the 2 metres of recirc python supplied.
Easy to set up the kit is provided with all tube and fittings required. Let us know if you're not confident with building this kit, so can pre-built it at our workshop, with just a few connections and fixtures to be made once unboxed.
Whats included in this Eco Tube Font Keg Beer/Cider Dispense Starter Kit
- Eco Tube Font, clamp straight onto a bar top with a thickness of up to 80mm
- Factory Re-built Maxi 110/Maxi 312 Shelf Cooler, choose in drop down menu
- Primary/Secondary CO2 Gas Regulator, with Gas Bottle Chain and Safety Warning label
- Keg Coupler of your choice (let us know what couplers you require, this information can be obtained from your beverage supplier)
- Fob Detector
- Flow Restrictor Valve
- All John Guest fittings tube etc, needed for direct placement underneath bar font
- 2 Metres of recirc Python to keep the beer cold right up to the tap
- 12 months warranty
Please allow up to 10 working days fro dispatch, the bar font is made to order.
Requires pallet shipping.
Drop down menu description
In the drop down menu the variants are as described below
Cooling coils per product option
The 1X cooling coil variant, cooler will crash down each product serving temp by up to 10°C from the ambient keg temperatures.
The 2X cooling coil variant, cooler will crash down each product serving temp by up to 20°C from the ambient keg temperatures.
You can select the correct variant by calculating the ideal serving temperatures for each of the products being dispensed by subtracting 10°C from the ambient keg temp. If it is not within the beverage recommended serving range, you will require 2X cooling coils per product cooling up to 12°C from keg temp.
Cleaning bottle option
It is essential to clean the product lines with beer line cleaner every week.
We provide the option to add a 5 litre cleaning bottle that will fit the keg coupler(s) provided with the kit + 5L of concentrated beeline cleaner.
Factory re-built cooler is re-conditioned as follows:
|Product coils:||Serviced or new where necessary|
|Water bath and refrigerant lines:||Reconditioned|
|Agitator pump:||Reconditioned or New|
|Warranty:||1 year back to base|
Cooler technical specifications option
Maxi 110 (1X cooling coil) option
|Recirculation type No-2 pump with 3/8" outlets. Pump lift:||1.8-Metres|
|3/8" Product cooling coils:||1 x Long 6-Metres 316 grade stainless steel (cooling coil will reduce incoming temperature up to 10 degrees Celsius)|
|Dimensions:||Width 360 x Depth 425 x Height 255mm (Please allow a minimum of 50mm extra space around the cooler for ventilation)|
|Electrical spec:||220-240Vac, Run-1 Amps Startup-10Amps, 230Watts.|
|Thermostat:||Ice bank only|
Maxi 312 (2X cooling coils) option
|Recirculation type No-6 pump with 3/8" outlets. Pump lift:||5-Metres|
|3/8" Product cooling coils:||2 x Long 6-Metres 316 grade stainless steel. (Each coil will reduce incoming temperature up to 10 degrees Celsius)|
|Dimensions:||Width 590 x Depth 455 x Height 280mm (Please allow a minimum of 50mm extra space around the cooler for ventilation)|
|Electrical spec:||220-240Vac, Run-2.5Amps Startup-10Amps, 575Watts.|
|Thermostat:||Ice bank only|